\documentclass[11pt,a4paper]{article}

% JTSE LaTeX Manuscript Template
% Journal of Tropical Science and Engineering

\usepackage[utf8]{inputenc}
\usepackage[T1]{fontenc}
\usepackage{lmodern}
\usepackage[margin=2.5cm]{geometry}
\usepackage{setspace}
\usepackage{graphicx}
\usepackage{booktabs}
\usepackage{longtable}
\usepackage{array}
\usepackage{multirow}
\usepackage{amsmath,amssymb}
\usepackage{siunitx}
\usepackage{caption}
\usepackage{subcaption}
\usepackage[colorlinks=true,linkcolor=blue,citecolor=blue,urlcolor=blue]{hyperref}
\usepackage[numbers,sort&compress]{natbib}
\usepackage{enumitem}
\usepackage{titlesec}
\usepackage{fancyhdr}
\usepackage{xcolor}

\onehalfspacing
\setlength{\parskip}{6pt}
\setlength{\parindent}{0pt}

\pagestyle{fancy}
\fancyhf{}
\fancyhead[L]{Journal of Tropical Science and Engineering (JTSE)}
\fancyhead[R]{Manuscript Template}
\fancyfoot[C]{\thepage}
\renewcommand{\headrulewidth}{0.4pt}

\titleformat{\section}{\large\bfseries}{\thesection.}{0.5em}{}
\titleformat{\subsection}{\normalsize\bfseries}{\thesubsection.}{0.5em}{}
\titleformat{\subsubsection}{\normalsize\itshape}{\thesubsubsection.}{0.5em}{}

\captionsetup{font=small,labelfont=bf}

\newcommand{\Author}[1]{\textbf{#1}}
\newcommand{\Affil}[1]{#1}
\newcommand{\CorrAuthor}[2]{\textbf{* Corresponding author:} #1; Email: \href{mailto:#2}{#2}}
\newcommand{\received}[1]{\textbf{Received:} #1}
\newcommand{\revised}[1]{\textbf{Revised:} #1}
\newcommand{\accepted}[1]{\textbf{Accepted:} #1}
\newcommand{\published}[1]{\textbf{Published:} #1}
\newcommand{\doiinfo}[1]{\textbf{DOI:} \href{https://doi.org/#1}{#1}}

\begin{document}

\begin{center}
{\LARGE\bfseries Title of the Article Goes Here\par}
\vspace{1em}

\Author{First Author$^{1}$}, \Author{Second Author$^{2}$}, \Author{Third Author$^{1,3,*}$}\par
\vspace{0.75em}

{\small
$^{1}$ \Affil{Department / Institute, University / Organization, City, Country}\par
$^{2}$ \Affil{Department / Institute, University / Organization, City, Country}\par
$^{3}$ \Affil{Department / Institute, University / Organization, City, Country}\par
}
\end{center}

\vspace{0.75em}
\CorrAuthor{Third Author}{corresponding.author@example.com}

\vspace{0.75em}
\textbf{ORCID (optional):} 0000-0000-0000-0000

\vspace{0.75em}
\received{DD Month YYYY} \quad
\revised{DD Month YYYY} \quad
\accepted{DD Month YYYY} \quad
\published{DD Month YYYY}

\vspace{0.5em}
\doiinfo{10.0000/jtse.0000}

\section*{Abstract}
Provide a structured and concise abstract of approximately 150--250 words. The abstract should clearly state the background, objectives, methods, key results, and main conclusions of the study. Avoid undefined abbreviations, references, and excessive methodological detail.

\textbf{Keywords:} tropical ecology; biodiversity; environmental science; materials science; infectious diseases; biotechnology

\section{Introduction}
The introduction should provide the scientific background, define the research problem, identify the knowledge gap, and state the objectives and novelty of the study.

\section{Materials and Methods}
Describe the study design, materials, sampling strategy, experimental procedures, analytical methods, and statistical analysis in sufficient detail to allow reproducibility.

\subsection{Study area / materials}
Provide relevant contextual information.

\subsection{Methods}
Describe methods clearly and cite standard protocols where appropriate.

\section{Results}
Present findings clearly and logically. Avoid repeating the same data extensively in both text and tables/figures.

\subsection{Tables}
An example table is shown in Table~\ref{tab:example}.

\begin{table}[h!]
\centering
\caption{Example table title.}
\label{tab:example}
\begin{tabular}{lcc}
\toprule
Parameter & Group A & Group B \\
\midrule
Value 1 & 12.3 & 10.4 \\
Value 2 & 45.6 & 42.8 \\
\bottomrule
\end{tabular}
\end{table}

\subsection{Figures}
An example figure is shown in Figure~\ref{fig:example}.

\begin{figure}[h!]
\centering
\fbox{\rule{0pt}{5cm}\rule{0.9\linewidth}{0pt}}
\caption{Example figure caption. Replace the placeholder box with the actual figure.}
\label{fig:example}
\end{figure}

\section{Discussion}
Interpret the results, compare them with previous studies, explain scientific significance, and discuss limitations.

\section{Conclusions}
Summarize the main findings and their broader implications. Avoid merely repeating the abstract.

\section*{Acknowledgements}
Acknowledge technical support, non-author contributors, and other assistance where appropriate.

\section*{Funding}
State all sources of funding. Example: This research was supported by [Funding Agency] under Grant No. [xxxx].

\section*{Author Contributions}
Example: Conceptualization, A.A. and B.B.; methodology, A.A.; investigation, C.C.; formal analysis, A.A. and C.C.; writing---original draft preparation, A.A.; writing---review and editing, all authors. All authors have read and agreed to the published version of the manuscript.

\section*{Conflict of Interest}
The authors declare no conflict of interest.

\section*{Data Availability Statement}
The data supporting the findings of this study are available from the corresponding author upon reasonable request.
% Alternative examples:
% The data supporting the findings of this study are publicly available in [repository name] at [DOI or URL].
% No new data were generated or analyzed in this study.

\section*{Ethics Statement (if applicable)}
For studies involving humans or animals, provide the name of the ethics committee, approval code, and approval date. Example: This study was approved by the Institutional Ethics Committee of [institution] (Approval No. XXX, dated DD Month YYYY).

\section*{Statement on the Use of AI Tools (if applicable)}
State whether generative AI tools were used in manuscript preparation and, if so, specify the tool and purpose of use in accordance with JTSE policy.

\bibliographystyle{unsrtnat}
\begin{thebibliography}{99}

\bibitem{smith2023}
Smith, J.; Nguyen, T.H. Tropical ecosystem dynamics under climate change. \emph{Journal of Environmental Science} \textbf{2023}, \emph{45}, 123--135. \href{https://doi.org/10.0000/example-doi}{https://doi.org/10.0000/example-doi}.

\bibitem{brown2022}
Brown, A.B.; Tran, V.Q. Materials performance in tropical environments. \emph{Materials Research} \textbf{2022}, \emph{18}, 88--101.

\bibitem{lee2021}
Lee, K.; Pham, D.N. Infectious disease monitoring in tropical regions. In \emph{Advances in Tropical Biomedical Research}; Publisher: City, Country, 2021; pp. 55--72.

\end{thebibliography}

\newpage
\section*{Notes for Authors}
\begin{itemize}[leftmargin=1.5em]
    \item Submit manuscripts in clear academic English.
    \item Ensure consistency in formatting, references, figure captions, and table titles.
    \item Use SI units throughout.
    \item Provide figure files at a minimum resolution of 300 dpi.
    \item Include all required declarations before submission.
    \item Check the JTSE website for the latest Submission Guidelines and policies.
\end{itemize}

\end{document}